Catalog
Enclosure rating
IP66
Maximum pipe exposure temperature
250°C
Minimum installation temperature
-60°C
Voltage rating
400 Vac
Switch rating
16 A (SPDT contact)
Switch type
Controller
Electrical connection
1 Terminal Block
Adjustable control range
-20°C to 40°C
Ambient temperature range
-60°C to +50°C
Adjustment point
5°C
Sensor material
Stainless Steel (CrNi)
Maximum control differential/accuracy
2.5% / ±2K
Max. electrical switching frequency
180 cycles/hour
Adjustment point
5°C
Electrical durability operating cycles
min. 100.000 cycles
Mechanical durability operating cycles
min. 300.000 cycles
Terminator ZT — Ambient Ambient Mechanical Thermostat
The Terminator ZT-Ambient thermostat is designed for use as an adjustable control thermostat for freeze protection applications of piping and vessels. This thermostat ...
Enclosure rating
IP66
Maximum pipe exposure temperature
250°C
Minimum installation temperature
-60°C
Operating ambient temperature
-60°C ≤ Ta ≤ +55°C 16 Amps Max, T6 85°C
-60°C ≤ Ta ≤ +50°C 25 Amps Max, T5 100°C
Voltage rating
230 Vac nominal up to 253 Vac1
Switch rating
25 A (Ohmic, NC contact)
Switch type
Controller
Electrical connection
Terminal Block
Terminator™ ZT Pipewall Sensing Thermostat
The “well-known” Thermon Terminator range has now been extended by the Terminator ZT – Pipewall Sensing Thermostat. Terminator ZT kits are approved for use in ordinary...
CX — Flanged Heater Specialty Heaters
Caloritech™ CX Replacement Boiler Flange Heaters are registered Caloritech™ quality replacements for boilers of the highest commercial grade available anywhere. Replac...
UL, CSA or IEC electrical design and manufacturing
Electrical hazardous location design and manufacturing
Electrical certifications cCSAus, IECEX or CE mark
ASME stamp NPT
ASME stamp U
Carbon steel and austenitic alloys construction
Designed and manufactured in one location
Worldwide standards compliance
Worldwide standards compliance
Worldwide approvals
Designed and manufactured under strict nuclear quality program
Designed and manufactured under the ASME program
Cost benefit and extended life
Better control of quality and on time delivery
Flanged Heater Engineered Solution
Electric immersion heaters are commonly used in tank and pressure vessel heating applications, where there is a requirement to maintain liquid temperature to a certain...
UL, CSA or IEC electrical design and manufacturing
Electrical hazardous location design and manufacturing
Electrical certifications cCSAus, IECEX or CE mark
ASME stamp N
ASME stamp U
Qualification in accordance to IEEE 323 available
Carbon steel and austenitic alloys construction
Designed and manufactured in one location
Worldwide standards compliance
Meets requirements for operation in presence of explosive gases
Worldwide approvals
Designed and manufactured under strict nuclear quality program
Designed and manufactured under the ASME program
Cost benefit and extended life
Better control of quality and on time delivery
Circulation Heater Engineered Solution
Circulation heaters are the equivalent to tube and shell heat exchangers with the particular feature that the core bundle is manufactured with electric tubular heating...
Suitable for vertical or horizontal vessel orientation
Custom designed assemblies available
Available in a range of standard vessel sizes, from 3" to 14" (76 mm to 356 mm); vessel sizes to 36" (914 mm) or larger are available on custom order
Available in a range of standard voltages, from 120V to 600V
Flanged inlet and outlet
Built-in thermocouple mounted in the outlet pipe
Pressure relief and bleed and drain valves available
Suitable for mounting on a factory supplied frame
Custom designed, fully prewired control panels available; mechanical or electronic high limit controls and temperature controls available
Multiple units can be supplied as multistage assemblies with either horizontal or vertical orientation
CE/ATEX approved for use in Hazardous Locations, and EAC Marked
EXC Series Specific
Available in a range of standard wattages, from 1.0 kW to 504 kW, depending on heater size selected
EXI Series Specific
Available in a range of standard wattages, from 6 kW to 672 kW, depending on heater size selected
Cross flow baffles improve heat transfer when heating viscous fluids and high temperature gases
EXF Series Specific
Available in a range of standard wattages, from 0.6 kW to 168 kW, depending on heater size selected
Cross flow baffles improve heat transfer when heating viscous fluids and high temperature gases
Circulation Heater
Caloritech™ Circulation Heaters are available in three different series
EXC Series
The Caloritech™ EXC High Density Circulation Heater with Copper Sheath is esse...